Pitching and Flipping
Pure Adrenaline
By Gregg Munck
Some people climb mountains, while others race cars or motorcycles.
Then there's a rare breed that actually ride bulls to achieve
their thrills. I prefer to get my adrenaline rush by pitching and flipping
the thickest cover I can find for largemouth bass. Other fishermen
like me know the experience can often be over quicker than an 8 second
bull ride. It doesn't matter because for me, there's nothing
more thrilling than having a 10 pound plus largemouth on a short, tight
leash that doesn't want to be controlled.
When searching for trophy largemouth, I locate the most burley brush
piles, thickest weed beds, gnarly log jams and nastiest rock piles
in the lake. If
it has danger written all over it, then you have located some promising water
to investigate. Veteran bass prefer to locate their haunts adjacent to deep
water access so they will always have plan "B" for an escape route.
Equipment:
Make sure to leave the wimpy fishing gear
at home. Stout equipment is necessary for fishing in heavy cover. For
my rod selection, I recommend
a 7' to 7'- 6" heavy or medium-heavy action
baitcasting rod with a strong butt section so you will have the capability
to "horse" the toads out of thick cover. I prefer some
flexibility in the tip section because it gives me the control I desire
while pitching and flipping my lures. Secondly, the rod is resilient
enough during those split second runs which trophy largemouths are
famous for.
The majority of the time, I use high-speed baitcast reels with a
6.2:1 or 6.3:1 gear ratio. A
l anglers have personal preferences and many are more comfortable
using lower gear ratio reels for their flipping presentations. I require
a smooth drag system and often set it fairly tight. I feel secure with
this combo
set-up, incase I have to suddenly take up a lot of slack line in an instant.
When fishing under these heavy cover conditions, my selection for line must
have excellent abrasion resistance, good casting qualities, and must be sensitive
enough so I am able to feel structure and strikes. I never spool up with
less than 20 pound test, and often 25 or 30 pound test is recommended. My
hook selection
for Texas rigging plastics is a 4/0 XGAP XPoint hook. When using larger plastics
I prefer a 5/0 Fat Gap Daiichi Bleeding Bait hook.
Tips While Pitching & Flipping:
1. A strike can occur at any given time. Make sure your boat is always
positioned correctly, so you will be ready to fight a big fish.
2. Rod position is important. I don't let my rod get any higher
than 45 degrees. Then when you believe you have a hook up, drop your
rod towards the water and take up any slack line with a couple quick
turns of the reel, and you're ready for a good solid hook set.
3. Be a line watcher. If your line jumps, or moves in any direction,
set the hook. I also like to keep my finger in contact with the line,
so you can feel subtle pick-ups.
4. Be aware of the depth you're fishing. For example, if you're
fishing in 5 feet of water, and your jig only drops 3 feet, set the
hook. An aggressive bass will take your offering before it ever has
a chance to reach the bottom of the lake.
5. I'm always checking hook points to make sure their sharp.
At the same time, check your line for nicks and frayed areas.
6. Prime targets. Make repeated, repeated, repeated casts. Especially
when
fishing highly pressured lakes. Keep working your lure in the zone
until you aggravate the bass into biting.
7. On certain days, a more subtle presentation works best. Then there are
other days when I like to add two or three rattles to my lure selection. Unfortunately,
the bass will have to clue you in on their various mood swings.
8. When I'm pitching and flipping, I work my lures like I'm trying
to hang them up. It helps you get your offering in every nook and cranny. I
would rather lose a few lures than pass up a big, feisty HAWG. Pitching and
flipping is a great technique during frontal conditions, and on bluebird days
after cold fronts when bass hold tight to cover.
The Hook-Up:
After the strike and hook set, make sure
you "horse" the
big bruiser out of her safety zone before the bass gets the upper hand
on you. Use this brief element of surprise to your favor. Stay on your
toes because many anglers often lose a huge bass near or at the boat.
I have experienced where these bruisers lunge for your trolling motor
and lower unit. I have also noticed that when you apply too much pressure
on a big bass, they will head for the surface. You certainly do not
want a monster thrashing around out of the water because it is much
easier for them to throw the lure. When I sense the big gal rising
up, I thrust my pole into the water to keep the bass from breaking
the waters' surface.
At this point there isn't any doubt that the big bruiser got
a good look at you and the boat, so that's the last place she
plans on going. Now there is only a few feet of line left between your
rod tip and the bass. The next lunge she makes you will need to be
ready to rip some line off your reel. This is when I also loosen my
drag quickly and "free spool" if you have to. If your fortunate
enough, and there is no obstructions in the water near your boat, you
can play the bass around the boat to tire her out.
Lures That I Keep Wet:
There is a long list of plastics that work for pitching and flipping.
Big craws, zipper worms, brush hogs, lizards, and twin tail grubs,
just to name a few. My go-to lures begin with a jig-n-pig. The pork
trailers offer a soft natural texture and the salty flavor that big
bass love. I prefer my jig colors to be dark, such as black, junebug,
or black and blue, which have always worked well for me while in
lightly stained and stained water. Of course I'll use more
natural tones when fishing clear water. The majority of the time,
I Texas rig large plastics. The tube baits I use are 4 1/2 inches
and larger. My plastic worms range between 10 and 12 inches in length.
I prefer using the larger 5" size senkos, which work well Texas
rigged or flipped when weightless. There are also times when a large
plastic craw can be a good choice.
Of course there will be times when it is necessary to down size the
lures you use. One occasion in which I choose a selection of smaller
profile baits is when I am fishing on a highly pressured lake.
After a cold front would be another reason to select the smaller
lures.
This is also a good time to leave the rattles in the tackle box.
But, the best thing about pitching and flipping is the monster
bass will keep your adrenaline flowing faster than the rapids in
a river.
For more information about Gregg Munck, just visit his website. http://www.munckstrophyfishing.com
Gregg Munck Bio
